Triple X Corner Strainer

Triple X strainers have been designed and British made all steel hot dip galvanised strainers, with fully welded base and thrust plates, which give real resistance and greater holding in the ground, fully welded top cap and pre-drilled holes for ease of strut installation. The 3.0mm thick strainer allows them to be driven in hydraulically or mechanically. The two main strainer assembly designs are the angle/diagonal stay and the box/horizontal assembly. The type of strainer you choose will be dependent on the topography, soil type, fence height and purpose.

Installing a Triple X strainer could not be simpler, minimal components mean full installation in less than 5 minutes is possible. This system offers an excellent return on investment with its ease of installation and longevity.

Triple X strainers are proven in the field throughout the UK. Used by contractors, farmers and landowners alike, for both stock, deer and security fencing. Diagonal strainer types are suitable for firm soil and high tension straining. They are quicker, cheaper and easier to install, ideal in most applications, however if you have loose soil or taller fences then a box strainer should be considered. Diagonal strainers are also suitable for in line slight bends of 20-30 degrees.

Standard are suitable for use with Clipex fences up to 1.4m in height for corners or two ways. Deer are suitable for Clipex fences up to 2m in height for corners or two ways.

Features
Guaranteed for 30 years (should exceed this subject to location)
Minimal components, only 5, easy to assemble (unlike other similar systems)
Exceptionally strong, thick walled tubular strainer can be mechanically or hydraulically driven in
Fully welded 4mm thick base and thrust/directional plates
Hot dip galvanised after manufacture in the UK to BS EN ISO 1461
Easy to transport to site (reduces carbon footprint of some projects)
Pre-drilled holes to take multiple struts for two way and corner strainers